Getting a Black Screen on your Monitor, even when it is connected with the Power is one of the most common issues that Windows users have to face. The screen either remains black or the monitor says no signal.
If you are facing the same problem, then don’t worry. We are going to tell you exactly what you need to do, to solve this problem and get the display of your monitor back.
There are a number of reasons and factors that can make your computer monitor go black or blank. The issue can be with the Hardware or the software.
Whatever the problem may be, you need to know everything there is to know about tackling this situation, so that you can deal with it easily if it ever happens again in the future.
So, let’s get started
How to troubleshoot no display on computer monitor?
1. Check if your Monitor is Connected to a Power Supply
The very first thing that you would want to check is to see whether the monitor is properly connected with the power supply. You may not know about it, but it is one of the most common reasons why people face the Black Screen issue.
You should check the light indicator to see whether the display is on or not. This is to make sure that the problem is not from the electricity side. If your monitor is connected to the power and it still says no signal, the problem is bigger.
Once you have checked the cable to see the monitor is connected to the power, here is what you need to do next…
2. Reconnect the Display to the Computer
The black display screen can also happen when you have not connected the display and computer properly. You need to take all the connections apart and redo them. This is how you should go about it.
- First off, shut down your PC using the power button and wait till your computer totally powers off. After that, unplug the video cable as well as VGA or DVI cable that you have used to connect the display to the computer.
- Check the port connectors and the cables to see if they are damaged or not. Use new cables if you can, just to be sure, and reconnect the display to the computer. It should start up normally now.
If the problem still persists, try the following methods
3. Check your RAM
Black screen can also happen because of fault RAMs. The no signal message can appear because of the poor connection between the RAM and the motherboard. You just need to open up your PC, take out the RAM from the RAM slot and just put it back in the slot. After that, just turn on your PC and you should be good to go.
This method works just fine most of the times. Still, it is recommended that if you don’t know how to open your PC, don’t try this all by yourself.
4. Use the BIOS and Recovery Options
If your computer monitor starts up and the goes black, then the problem could be with your windows. You need to go into the BIOS of your computer and boot into safe mode. The method for that differs from manufacturer to manufacturer. After that, you can use the System Restore or Repair options to get the system to refresh.
You can reset the entire system which would allow you to reinstall windows, without having any kind of effect on your files and data. This method would work 90% of the time, provided that there is no problem with the monitor itself.
5. Check the System Hardware
This would seem like a lot of hassle, but we are only sharing it here because it is true. The black screen can also happen when there is some sort of conflict between a piece of hardware and your computer system. For example, a faulty hardware unit can cause other components to mineable.
So, you need to take an in-depth look at your PC to see whether it has any kind of faulty piece of Hardware. Check out the peripherals as well as internal components, before you go on and take your monitor out to a repair shop.
Related Links
Frequently Asked Questions
Why does my monitor say no signal?
This could be because of a hardware or a software error. It could happen because of driver issues, because of damaged hardware or some sort of compatibility issue.
Why is my monitor saying no signal?
When your monitor says no signal, it means that it can’t boot up which basically means it is not working. Now there can be many reasons for that. From driver issues to some kind of problem with the hardware and stuff like that.
What do you do when your computer says no signal?
You need to check if the display is properly connected to the computer. Also check your power cable or go on to the recovery options to restore the display.
Why does my monitor say no signal when I turn my computer on?
This could be because of a number of reasons; from damaged hardware to software issues as well as an improper connection between the computer and the display monitor.
Conclusion
Getting a black screen on your computer display is an annoying situation that stops you from using your computer. When your computer display shows the No Signal message, it usually means that the display is not working, and you need to solve this issue if you want to use your computer system.
In this article, we have talked about some of the best solutions for No Display on Computer monitor error that you can try out. Go on and try out all these methods on your computer to get your monitor display back.
Let us know what you think about these methods in the comments section. Also, if we find any more solutions for No Display, we’ll make sure to keep you posted. So, stay tuned!
Leave a Reply